A3 Steel Auto Tyre Killer 3m Reflective Film Speed Bump Remote Control

Auto Tyre Killer 3m Reflective Film Speed Bump Remote Control A3 Steel for Anti-terrorist

Hydraulic Tyre Killer Overview

The deceleration ridge type tire killer device is a new product developed by us in combination with the characteristics of the past road vehicles. The product adopts automatic and manual control, and has the functions of deceleration ridge and broken tire thorn. It is the essential safety protection equipment to control the speed of the vehicle, prevent illegal rushing and barbaric vehicles, and ensure the personal safety of the road management personnel and national property safety

Hydraulic Tyre Killer Features

1. The deceleration type of the tire-breaking device adopts a deceleration ridge type casing, and a reinforcing rib is arranged in the casing at intervals of 10 cm, and a transmission shaft is arranged laterally, and one end of the transmission shaft is located outside the casing and connected with the power driving device.

2. The drive shaft is provided with a groove and a broken tire.

3. The upper part of the casing has a horizontal shell wall, and the shell wall is provided with a broken tire slot.

4. The power driving device comprises an electric motor and a trigger device installed in one end of the electric control box; when used, the motor is triggered to rotate the shaft to make the broken tire stand up (approximately 75 degrees from the ground), the trigger is installed in a convenient position

Hydraulic Tyre Killer Technical Parameters

Hydraulic Tyre Killer  Applications

Urban transportation, military and important national organs and surrounding areas, pedestrian streets, highways, toll stations, airports, schools, banks, oil depots, water plants, liquefied gas stations, power stations and many other occasions lifting columns, campus hydraulic lifting columns, scenic lifting piles

RFQ

Are you manufacturer?

Yes, we are professsional manufacturer of security threats detection system in south of China.

Stable quality and foremost service always be the key that we focus on.

How many days we can get the machine after payment?

Normally, with stock only need 3-5 days for leading time.

Without stock, need 10-15 days to manage the production.

Delivery by sea, air for your choices

How about the warranty and services?

Provide one year warranty and lifetime technic support.

Accept to send our engineer to your country for training in additional cost.

Free training one-on-one in our factory for free.

Hydraulic Tyre Killer Showroom